75-year-old brand new MG D/F/J "Klaxon Horns" We regret these have finally all gone.
BRAND NEW BATCH of BONORA RADIATOR & PETROL TANK CAPS.
These are ex-stock and are fully chromed with standard radiator fitting or standard press and turn tank fitting.
Prices vary depending on model, size and finish on these, so please ring or e-mail on these units.
TA/B/C/D OWNERS. JUST ARRIVED the latest batch of centre dash panels in black with chrome edge and lettering for TA/B and early TC models, and honey coloured panels with chrome edging and full lettering for later TC models and TDs. All at the same price of £165 plus vat.
MG C/J4/K3 & Specials - Original Factory Pattern Wing Fixing Clamps
These superb lost wax castings are made in sand-blasted stainless steel and give a proper professional finish to the fitting of cycle wings to our cars. They are superb value at £26.80+VAT and although not shown in the pictures come complete with bolts nuts & washers. We also offer alongside, the correct under-rubber, moulded as a snug fit to the clamp base. These are also ex-stock at £3.95ea +VAT.
Rear Spring Front Chassis Pins - Special Offer
No change in specification - as always in EN19T induction hardened, and ground finish - on offer at only £23.50 each + VAT.
F2/J2/L2 Tank Mounted Petrol Taps - THESE SUPERB UNITS ARE HERE IN STOCK available with or without the curly feed pipes.
You have all become familiar with the write-ups and recommendations of our redesigned (internally) P/K/N & TA main/reserve taps with their 'guaranteed' no-leak solid centre, twin 'O' ring internals. These have been a great success and have transformed the performance of many owners' cars. Well it is time J/F & L owners had the same opportunity and experience.
We have now produced identically original J2/F2/L2 taps but with redesigned 'no leak' internals. No more sucking 80% fuel and 20% air. They are precision made to guarantee perfect operation and are therefore not cheap at around £195 + VAT, but you'll eliminate poor and erratic running.
You know the quality is right, and is why this new leak-proof unit is selling so quickly.
Can also be supplied with the two correctly curled feed pipes next to the tap for an additional £42 + VAT, as per photo. Taps & pipes AVAILABLE NOW.
FOR P/N and TA/B OWNERS, the next batch of 'no-leak, solid centre/twin 'O' ring' main/reserve taps are here NOW! Many owners do not realise the difference these make to the running and performance of their engine. The ridiculous chamfered cork design supplied by the factory sucked 80% fuel & 20% air. This bizarre arrangement is completely eliminated by using one of our new taps that are guaranteed and can only suck 100% fuel, but of course look identical from the outside. They are not cheap, far eastern product, but are precision made, and you'll only ever need one for the lifetime of your ownership. They can be purchased as taps only, or as a complete system from from dashboard to bulkhead with correct type knob, plinth, rod and joints. Be sure to state model required. TAPS ONLY....£195 plus vat, COMPLETE SYSTEMS......£245 plus vat.
MG TA/early VA Original Tool Kit with optional Neoprene Rubber Tool Trays
These superb kits comprise all original tools (no reproductions), and have taken many months of hunting to assemble. Even the open ended spanners are the flat pressed steel units to lay flat in the shallow trays. A full kit of tools without trays costs £345 + VAT and the trays are available at £155 + VAT per pair . If you buy kit complete with tool trays as a package the price is £460 + VAT, a massive discount of £40 a set.
MMM & TA/B/C Fully Rebuilt 2 & 3 Brush Dynamos
We have good stocks now of fully restored original MMM, TA & TB 3 and 2 brush generators (most with brand new armatures), complete with rear tachometer take-off drives and Lucas crested connector covers. Outright prices (no exchange) cost £365 + VAT, exchange units start at £220 + VAT. All have 12 months guarantees for originality & workmanship.
All MMM 6V and 12V fully rebuilt dynamos and starter motors retained in stock as standard on exchange or outright buy. Outright purchases without exchange, fully restored with new armature cost £550. With an exchange unit, prices begin around £400, depending on condition of old unit. Starter motors are £365 o/right, £265-£295exchange . ALL unit carry a full 12months guarantee.
Please note we still have a few 'Smiths of Cricklewood' 'New Old Stock' 50 year old, rear of generator tachometer reduction boxes for all 'T' series models (TA-TF) at £135 + VAT each - these are not to be confused with the cheap far eastern imported ones.
MG L/K Sumps
Not 'in production' as offered by others, but here and ready to sell. High quality units fully machined, double impregnated and ready to fit. £395 ea +VAT
Handbrake to Chassis Crosstube Mounting Bracket
Long, long overdue, this important (& often missing) item is imperative when fitting the handbrake into the chassis. Perfect reproduction of the original with correct provision for return spring. £55 ea + VAT
J4/K3 Petrol Tank Top Fuel Bosses
These superbly machined brass fittings are from solid, and provide the fuel outlets for racing MG slab tanks and come complete with fuel outlets & elbows all in polished finish. £185 ea + VAT. (The brass fuel gauge tops will be next to be produced).
Volumex Supercharger Replacement Oil Reservoir
A neat, tidy aluminium oil reservoir to replace the original plastic body with knurled lid & brass fittings. £120 ea + VAT.
MG 'M' type Centre Dash Panels
We have resurrected the tooling to reproduce again the M-type dash centre panels that we offered 5 years ago. These superb panels come complete with rear pins, MG & ROTAX motifs and correct eggshell black finish with white lettering as original. Very limited at £165 ea + VAT.
Adjustable Lower Front Cycle Wing Stays for C/K models
These lower front stays are adjustable to allow wings to fall centrally over any width of wheel & tyre, complimentary to the forward stays below. Excluding the joint clamps - £98 per pair + VAT . Joint clamps - £26.80 ea + VAT, rubbers - £3.95 ea + VAT.
The standard non-adjustable lower stays are always in stock for Fs/Js and other 3' 6" track MMM cars at just £78pr plus vat.
C/K3/ and for TA/B/C conversions. Front Cycle Wing Stays
We have produced another (improved) batch of C/K3 front forward headlamp/wing stays. These excellent casting are the best and most attractive looking whether building an original or replica C or K3 MG. £225 per pair + VAT. TA-TC owners ? please note these stays are ideal if you are contemplating fitting cycle wings. Standard J2 stays do not take the wings over the wheel centres whereas these do.
BARGAIN NEW PRODUCT – MMM Engine/Radiator Mounting Caps
With 5/16" bolt holes for models M/D/F/J or 3/8" holes for models L/K/P & N. £35 ea + VAT
MMM Pre-Select Gearbox Remote Change Extensions TO ORDER ONLY
This is the thinner, much preferred 'Q' type remote favoured over the bulky, more cumbersome K3 unit. Apart from polishing, thus unit will fit an ENV75 pre-selector and is complete, ready to fit. £650 + VAT
PRE-SELECT GEARBOXES in fully restored condition ARE ALSO AVAILABLE NOW TO ORDER ONLY at £4500 -£5500 COMPLETE with bell housing, pedal and linkages. (On this item, price will be that ruling at time of despatch. All pre-quotes honoured regardless)
4 Spoke 16" MMM & MG TA Steering Wheel
Encompassing our new optional service of having these (or other) wheels strung with 3mm cord for better grip and vintage appearance. 16", 4-spoke wheel as shown - £445ea. +VAT. Your wheel strung, any 16" or 17" type - £125 ea + VAT.
Brand New MG 'M' type complete headlamps. A bargain production in this day & age.
For the first time we can offer a perfect reproduction of the LUCAS R47B headlamps that were fitted as original equipment to most MG 'M' types. (Even the very late cars that used the Rotax '701' units would not be disgraced in having these on board, and more than welcome when you can't find any '701s'!) These superb lamps have the correct twist-off, rolled edge rims, frosted flat lenses, silvered reflectors with double dipping bulbs and Lucas 'King-of-the-Road' medallions. Finished in black with chrome rims - £485 + VAT per pair .
We still have good stocks of ORIGINAL FULLY RESTORED LUCAS HEADLAMPS at £650pr. L140s/M140s/L150s, plus all variations of the correct fog/spotlamps for MMM & T Type. Nice to know you can still get the original stuff.
TA/B/C Starter Motors
Again, all original, all fully rebuilt, all with guarantee. Outright purchase £265 +VAT, exchange prices start at £185 + VAT. Please note we do not offer any cheaper Chinese or Taiwanese far-eastern product here.... only Lucas originals
Just In.. batch of pre-war plinth mounted 'Brooklands' Aero Screens
These are fully laminated now, with polished frames and skirts , and come complete with polished s/steel fixing bolts. £145 each + VAT. or £280 per pair + VAT.
A rare chance to secure an Original Pre-War MG Tool Kit
These original kits cover all the MMM (Midget/Magna/Magnette) models, and comprises all ORIGINAL pieces, no repros, except for the tool roll itself, and that is a precise copy of the pre-war roll in brown cotton backed hessian with PVC edging. It has taken a long time to assemble the original kits we have for sale and the price reflects the price of the roll, the 18+ rare pieces and the fact they are all original. For those that would like to really 'finish' their car, and add considerable value to it, should move swiftly to secure one of these. £395 + VAT, inclusive of roll. (We also have a few original jacks, handles, stirrup tyre pumps and oiling guns available as extras to complete entire tool kits - please enquire.)
New MMM GEAR LEVERS
Just arrived, made from top grade HT steel in view of their nature, as so many originals are now cracked at 75 years old, and can be highly dangerous. Top specification in High tensile EN 16T ££98.50 ea. + vat. We don't have a big batch, so don't delay if needed.
Calling all MG 'M' Owners
Here are last, (we thought exclusive to us!), the New MG 'M' type Bonnet & Apron Catches. AVAILABLE AT JUST £85ea. complete with clips to the original specification. Like all the parts we do, we insist on high quality and accuracy and not a cheap copy from the far-east. These catches have the correct barrels, knurled top with the 'MG' logo insert exactly as original. Each comes with its own clips for either bonnet fixing or apron fixing. An enormous amount of work has gone into making these to help all 'M' owners. You even have the choice of nickel or chrome finish. At 2010 manufacturing prices these represent remarkable value for such relatively small numbers. Nickel or chrome, including clips - £85 ea + VAT.
BACK AT LAST!!! The superb TA/B/C Moulded Rubber Gearbox Covers following the mould breaking. A complete new pattern nhas been made and they are better than ever before, and fit as so snuggly and accurately.
Absolutely not to be confused with those sold elsewhere in plastic or fibreglass. These as original jig moulded in heavy gauge rubber with correct fixing holes, filling plug flap and dipstick provision. For those of you undertaking a quality rebuild, these are an absolute 'must'. £169.50 each + VAT.
Instrument Cluster Plates
Superbly tooled, exactly as original with black (J/F/L models) or brown (P/K/N models) centres with correct raised bead and octagon in chrome. Remember these come complete with 'MG' engraved chromed button ready fitted. £96.50 complete each + VAT. All gauges, switches and lamps are available to fill these cluster plates - just ask.
Brand new correct gauge dark brown leather with sewn-in chrome end fittings, the original 3-piece belt, double buckle specification. Not the single buckle "suitcase look". Fantastic value at £65 each + VAT.
MG TA Air Cleaner Canister
For many years this item was made incorrectly, being wrong length and diameter. We are now pleased to being you the correct size canister to original specification, but with improved internal filter that only needs a paraffin wash every 3-5000 miles. Finished in black with joint clamp to manifold - £155 ea + VAT.
Polished alloy manifolds to complete the TA air cleaner system are NOW IN STOCK ALSO £69.50 ea + VAT.
MG TB/C Air Cleaner Canister
In addition to the air cleaner for the TA, we are pleased to offer from stock the TB/TC air cleaner canister. To correct length and diameter, this unit also comes with improved filtration and can be cleaned with a paraffin wash every 3-5000 miles. Finished in black with joint clamp to manifold - LIMITED at £155 ea + VAT.
The 2-part MG crested manifold sets are available from stock with chrome clamp and rubber seal included - £135 per set + VAT.
MG F2/J2/L1/L2 Mottled aluminium/engine turned Dashboards
These are not the cheapest on the market, but are superb from the ORIGINAL manufacturers and have the correct quarter segment 1" mottle, and are as per the factory thickness in both standard and deluxe versions. In stock now at £195ea. + vat.
MMM & Early 'T'-type: Double Row, Bronze Caged Rear Hub/Wheel Bearings
I am pleased to inform all customers that I have just completed and taken delivery of 500 original specification, double-row, bronze caged MMM & TA/B/C rear wheel hub bearings. They are available NOW at a special introductory start price of £85ea. + VAT (plus post if not collecting). Please ring, fax or e-mail or see them at Stoneleigh (Feb. 20th..) These bearings are long overdue, and have been tested to specification far higher than will be demanded by even the most potent of MMM racing cars. They will probably outlast your ownership of your car, and are a certain 'must' for all hill climb and race contenders.
BACK IN STOCK.......Hand Woven Crimped Brass Radiator Meshes - Chrome Plated
Whilst still available ex-stock in the smaller size for D/F/J/L models (£220ea.), we have for the first time now produced them in the larger sizes for the K/N/TA/TB & TC models. These are now in stock at £220ea (all prices subject to carriage & VAT). These are quite superb quality being made on 19th century machinery and are EXACTLY as the factory supplied. THEY ARE ALSO AVAILABLE NOW FOR THE FIRST TIME FOR THE MG K3 RACING MODELS also correctly framed at £220ea. Price of brass has pushed these prices up, I'm sorry.
MG PA/PB Exhaust Manifolds
These highly praised reproductions have long been overdue. Once again these are our own manufacture and come to you with the quality you expect from us. The fit is accurate, ALL the inscriptions have been finely cast in, and they are finished in a non-rust hot spray to look as a new one did when it left Abingdon. The stock of these is rapidly diminishing, so for only £185 including vat & carriage, I would order one of these before the supply is exhausted, but we can repeat if sufficient demand. )
MG J4/Q Types & Specials: HV5 15⁄8" Supercharger Carburettors by SU
These astoundingly good units are not only beautifully made but unlike so many that have come to the market in the past you are receiving the accuracy here of the factory product. They come complete with T2 float bowls, choke & throttle linkages, standard '01' needle, and polished 'wine bottle' piston covers. A range of needles is available from us to suit various applications. We have the units in stock at present, but with limited supply numbers and long, long lead times don't leave it if you'll shortly be needing one. They retail at £795 each complete, plus VAT. We have now added to this range with another batch of HV8 carburettors at 17⁄8" size, to exactly the same OE specification as those above.